Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 257

Message
The print server received error <error number>
during attempt to log in to the network. Access to
the network was denied. Verify that the print server
name and password are correct.
trap account is unavailable.
usbd is disable.
WINS name registration: No response to
server<WINS server address>
WINS wrong scopeID=<Scope ID>
wpa authentication Failed
wpa authentication started
wpa IEEE802.1X started
wpa connecting to authenticator
wpa link up
wpa probe response doesn't have IE.
wpa success authenticated
wpa success key received
wpa waiting for key
wpasupd start
wpasupd stop
Problem and solutions
Login to the file server failed. The print server is not
registered or a password is specified. Register the
print server without specifying a password.
v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
Plug and Play function and printing is disabled
because usbd is disabled in the security mode.
Enable usbd in the security mode.
There was no response from the WINS server.
Check the correct WINS server address is entered.
Alternatively, check the WINS server is functioning
properly.
An invalid scope ID was used. Use a valid scope
ID.
WPA authentication failed. Check the WPA
configuration.
WPA authentication has started.
WPA authentication has started.
WPA is connecting to authenticator.
WPA key exchange has finished, and
communication has been terminated.
WPA probe response does not have IE.
WPA authentication was successful.
WPA key reception was successful.
Waiting for WPA key.
wpasupd has started.
wpasupd has ended.
Message List
6
255