Form Feed; Printing From A Selected Tray - Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual

Form Feed

This section gives instructions for operating the printer when there is no tray for the selected paper size or
type, or when paper loaded in the printer has run out.
• The tray cannot be changed if the following functions are set:
• Duplex Print from a tray that does not support duplex printing
• Cover Sheet
• Slip Sheet
• If form feed is selected for a tray with the following settings, you can change the tray by canceling
the settings:
• Duplex Print
• p.149 "System Menu"

Printing from a Selected Tray

If the printer does not have a tray for the selected paper size or paper type, or if the selected paper loaded
in the printer has run out, a caution message appears. If this message appears, do the following procedure.
1. Press the [Form Feed] key, and then select the paper tray on the screen.
2. Press the [ Enter] key.
The job is printed from the selected tray.
• If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may
occur.
Form Feed
3
115