Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 158

5. Making Printer Settings Using the Control Panel
• 0 MB
• 2 MB
• 4 MB
• 8 MB
• 16 MB
• Default: 4 MB
• When the amount of SDRAM is small and RAM Disk is set to 16 MB, printing may not be possible
depending on the print job and duplex printing may be canceled. If this happens, increase the
amount of SDRAM, or set RAM Disk to 8 MB or less.
• For details about the optional SDRAM module, see Hardware Guide.
5
• "Attaching Memory Unit Type C 128MB/256MB (SDRAM Module)", Hardware Guide.
Auto Email Ntfy
You can specify whether or not to send an error message to a preset e-mail address when an error
occurs in the printer.
• On
• Off
• Default: On
• After changing the setting, turn off the power of the printer briefly, and then turn it on again.
• Web Image Monitor Help
156