Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 234

6. Monitoring and Configuring the Printer
Error: PDL
Error: Rem. Certificate Renewal
Error: USB Board
Error: USB Interface
Error: Wireless Board
Error: Wireless Card
Full: Waste Toner
6
Hex Dump Mode
Independent-supplier Toner
In Use: Input Tray
Jobs Suspended
Loading Toner...
Low: Black Toner
Low: Toner
Malfunction: Duplex Unit
Malfunction:Lower Paper Tray(s)
Malfunction: Output Tray
Memory Low: Data Storage
Miscellaneous Error
Mismatch: Paper Size
232
Messages Description
An error has occurred in the page description
language.
An error has occurred in the remote certificate
renewal.
An error has occurred in the USB board.
An error has occurred in the USB interface.
An error has occurred in the wireless board.
Wireless card is not inserted during start up, or
the IEEE 802.11b interface unit or the wireless
card is taken out after start up.
Waste toner is full.
It is a hex dump mode.
Toner that is not recommended is set.
Other functions is using the input tray.
All jobs are suspended.
Toner is being supplied.
The black toner cartridge is not set correctly, or
toner is almost running out.
The black toner cartridge is not set correctly, or
toner is almost running out.
There is a problem with duplex unit.
There is a problem with the Lower Paper Tray.
There is a problem with output tray.
Memory shortage has occurred while the
document was being accumulated.
Other error has occurred.
Indicated paper tray does not contain paper of
selected size.