Trimming" The Increment Time; Rec Mute Function; Setting The Rec Mute Time; Fade-In And Fade-Out - Tascam CD-RW402 Owner's Manual

"Trimming" the increment time

It is also possible to move the track increment time
backwards and forwards by up to 125 frames either
before or after the received track division signals (in
the same way as for sync recording as described in
""Trimming" the sync" on page 35.
1
Press the MENU key (2) and turn the
DIAL to display
REC MENU 2 ?
2 Press the
MULTI DIAL

Rec mute function

The rec mute function allows instant cut-off of the
input signal, and records silence on the disc.
1
While recording is in progress, press the
MUTE key.

Setting the REC MUTE time:

The time during which recording is muted before the
drive enters record ready after the
has been pressed is set in the following way:
1 Press the key (2) and turn the
MENU
DIAL to display
REC MENU 2 ?
2 Press the
MULTI DIAL
3 Turn the
MULTI DIAL
.
REC MUTE TM ?

Fade-in and fade-out

To provide smooth beginnings and endings to
recorded tracks, the unit provides fade facilities.
Fade-ins are from –∞ (silence) to the set input level
("Signal volume" on page 30) and fade-outs go from
the current input volume to silence.
The fade-in and fade-out times can be set indepen-
dently in increments of one second, from 1 second to
24 seconds.
To set the fade times:
1
Press the MENU key (2) and turn the
to display
DIAL
REC MENU 1 ?
5 – Recording—Rec mute function
MULTI
.
.
REC
key
REC MUTE
MULTI
.
.
until the display shows
MULTI
.
3 Turn the
MULTI DIAL
.
INC TRIM ?
4 Press the
MULTI DIAL
5 Turn the
MULTI DIAL
(sync trim) value between –125 frames and
+125 frames (in 1 frame steps).
6
Press the
MULTI DIAL
leave the menu.
The display shows
REC MUTE
displaying the current level and the moni-
tored sound is cut.
2
After a set time (see below), the unit enters
record ready mode.
4 Press the
MULTI DIAL
5 Turn the
MULTI DIAL
(mute time) value between 1s and 10s (in 1
second steps).
6 Press the
MULTI DIAL
leave the menu.
2 Press the
MULTI DIAL
3
Turn the MULTI DIAL
or
FADE IN TM? FADE OUT TM?
4
Press the MULTI DIAL
5 Turn the
MULTI DIAL
( or ) value between 1s and 24s
FADE IN FADE OUT
(in 1 second steps).
6 Press the
MULTI DIAL
leave the menu.
TASCAM CD-RW402 Owner's Manual
until the display shows
.
to change the
INC_T
to make the setting and
, the meters stop
.
to change the
MUTE_TM
to make the setting and
.
until the display shows
as appropriate.
.
to change the fade time
to make the setting and
37