Selecting Operation Mode; Setting A Mode; Checking Mode; Attaching The Grip - Tascam dr-44wl Reference Manual

CAUTION
• If the input sound is still distorted after adjusting the input
level of the unit, reduce the playback sound of the external
device.
• When an external audio device with a fixed output line level
is connected, it would be impossible to control the gain level
appropriately because of excessively large input signals. In
such cases, use the headphone jack or other level-control-
lable output for connection to the unit.

Selecting Operation Mode

Two operation modes are available in this unit: 4CH and MTR
modes. (See "Overview of recording modes" on page 18.)

Setting a mode

1. Press the MENU button to open the
2. Using the wheel, select (highlight)
press the ENTER/MARK or / button.
The screen is displayed.
MODE
3. Using the wheel, select (highlight)
ENTER/MARK or / button.
4. Use the wheel to select operation mode.
Options: (default value),
4CH
5. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
NOTE
The selected mode is stored and started in the selected
mode when the power is turned on next time.

Checking mode

When the operation mode is set to
the top of the display lights up.
Audio device
or
external device
screen.
MENU
menu item and
MODE
and press the
MODE
MTR
, the MTR indicator on
MTR
3 – Preparation

Attaching the grip

You can attach the included grip to the tripod mounting threads
(1/4-inch) on the bottom of the unit and use it as a handgrip.
You can also use the grip to attach the unit to a mic stand.

Attaching the shoe mount adapter

Attach the included shoe mount adapter to the tripod mounting
threads on the bottom of the unit to use this unit as an audio
recorder with a digital SLR camera or video camera, for example.
17
TASCAM DR-44WL