Managing Cf Cards (Cf Manage); Operation Mode Selection (Operation Mode) - Tascam HS-4000 Owner's Manual

11 – Internal settings

Managing CF cards (CF MANAGE)

Use this screen to manage CF cards.
CAUTION
If you execute any of the FORMAT item commands or CF
COPY, all the data on the CF card will be erased.
Execute these commands only if you are absolutely certain
that you want to erase the card.
CURRENT MEDIA
This shows the currently selected card slot name and its
status.
CF SELECT
This opens the CF SELECT screen where you can select the
CF card used for recording and playback.
FORMAT
Format the CF card.
p QUICK button
This only formats CF card management information.
p FULL button
This formats the entire CF card.
p QUICK & Create Project button
After formatting only the CF card management information,
a new project is automatically created with the same
settings as the current project.
CF COPY
Use to copy a CF card.
The entire CF card in the current CF slot will be copied to the
CF card in the other CF slot.
116
TASCAM HS-4000
Operation mode selection
(OPERATION MODE)
Set the unit's operation mode on this page.
After selecting an operation mode, touch the SET button to
switch to it and return to the Home Screen.
TIMELINE MODE
The timeline mode becomes active and the Home Screen
reopens.
TAKE MODE
The take mode becomes active and the Home Screen
reopens.
PLAYLIST MODE (SINGLE)
The single playlist mode becomes active and the Home
Screen reopens.
PLAYLIST MODE (DUAL)
The dual playlist mode becomes active and the Home
Screen reopens.
PLAYLIST MODE(A/B MIXED)
The A/B MIXED playlist mode becomes active and the Home
Screen reopens.
ON AIR MODE
The on-air mode becomes active and the Home Screen
reopens.