Access Restrictions > Internet Access - Cisco Small Business WRP400 User Manual

Configuring Network Security and Controlling Internet Access
Access Restrictions > Internet Access
Access Restrictions > Internet Access
NOTE
Cisco WRP400 User Guide
• IPSec Passthrough: Internet Protocol Security (IPSec) is a suite of protocols
used to implement secure exchange of packets at the IP layer. To allow IPSec
tunnels to pass through the WRP400, keep the default, Enabled.
• PPTP: Passthrough Point-to-Point Tunneling Protocol (PPTP) allows the
Point-to-Point Protocol (PPP) to be tunneled through an IP network. To allow
PPTP tunnels to pass through the WRP400, keep the default, Enabled.
• L2TP Passthrough: Layer 2 Tunneling Protocol is the method used to
enable Point-to-Point sessions via the Internet on the Layer 2 level. To allow
L2TP tunnels to pass through the WRP400, keep the default, Enabled.
You can use the Internet Access Policy screen to block or allow specific kinds of
Internet usage and traffic, such as Internet access, designated services, and
websites during specific days and times.
After you enter settings on this page, click Save Settings to apply your changes, or
click Cancel Changes to cancel your changes.
7
69