Cisco Small Business WRP400 User Manual page 74

Configuring Network Security and Controlling Internet Access
Access Restrictions > Internet Access
Cisco WRP400 User Guide
• Applied PCs: Click Edit List to select the computers that will be affected by
the policy that you selected in the Access Policy list. The List of PCs window
appears.
Choose the PCs that will be affected by this policy:
- MAC Address: Enter a MAC address that you want to add to the list.
- IP Address: Enter the final octet of an IP address that you want to add to
the list.
- IP Address Range: Enter the final octet of an IP address in the first box,
and then enter the final octet of another IP address in the second box, to
create a range of IP addresses to add to the list.
Click Save Settings to save your changes, or click Cancel Changes to
cancel your changes. To return to the Internet Access Policy screen, click
Close.
• Access Restriction: Select the appropriate option, Deny or Allow,
depending on whether you want to block or allow Internet access for the
computers that are listed on the List of PCs screen.
7
72