Configuring Your Wireless Network
Wireless > Wireless MAC Filter
Wireless > Wireless MAC Filter
NOTE
Cisco WRP400 User Guide
Wireless access can be filtered by using the MAC addresses of the wireless
devices within your network's radius.
After you enter settings on this page, click Save Settings to apply your changes, or
click Cancel Changes to cancel your changes.
Figure 31 Wireless > Wireless MAC Filter
•
Select a SSID: Select the SSID that you want to configure.
If you enabled the second wireless network on the Basic Wireless
NOTE
Settings screen, then you can set up wireless MAC filtering for each
SSID.
6
62