Wpa Enterprise - Cisco Small Business WRP400 User Manual
Wireless-g broadband router with 2 phone ports
Hide thumbs
Also See for Small Business WRP400:
- Regulatory compliance and safety information manual (35 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (173 pages)
Table of Contents
Advertisement
Configuring Your Wireless Network
Wireless > Wireless Security
Cisco WRP400 User Guide
WPA Enterprise
This option features WPA used in coordination with a RADIUS (Remote
Authentication Dial-In User Service) server. This option should only be used when
a RADIUS server is connected to the WRP400.
Figure 29 Wireless Security > WPA Enterprise
•
WPA Algorithms: WPA supports two encryption methods, TKIP and AES,
with dynamic encryption keys. Select the type of algorithm, TKIP or AES.
The default is TKIP.
•
RADIUS Server Address: Enter the IP address of the RADIUS server.
•
RADIUS Port: Enter the port number of the RADIUS server. The default
value is 1812.
•
Shared Key: Enter the key shared between the WRP400 and the server.
•
Key Renewal Timeout: Enter a Key Renewal Timeout period, which
instructs the WRP400 how often it should change the encryption keys. The
default is 600 seconds.
6
60
Advertisement
Table of Contents
Troubleshooting
