Cisco Small Business WRP400 User Manual page 37

Basic Settings
Setup > DDNS
Cisco WRP400 User Guide
• User Name: Enter the User Name for your DDNS account.
• Password: Enter the Password for your DDNS account.
• Host Name: Enter the DDNS URL assigned by the DDNS service.
• System: Choose the DynDNS service you use: Dynamic, Static, or Custom.
The default selection is Dynamic.
• Mail Exchange (Optional): Enter the address of your mail exchange server,
so emails to your DynDNS address go to your mail server.
• Backup MX: This feature allows the mail exchange server to be a backup.
To enable the feature, select Enabled. To disable this feature, keep the
default, Disabled. If you are not sure which setting to use, keep the default,
Disabled.
• Wildcard: This setting enables or disables wildcards for your host. For
example, if your DDNS address is
wildcards, then x.myplace.dyndns.org
To enable wildcards, select Enabled. To disable wildcards, keep the default,
Disabled. If you are not sure which setting to use, keep the default, Disabled.
• Internet IP Address: The Internet IP address of the WRP400 is displayed
here. Because it is dynamic, it will change.
• Status: The status of the DDNS service connection is displayed here.
• Update: To manually trigger an update, click this button.
myplace.dyndns.org
will work as well (x is the wildcard).
4
and you enable
35