Configuring Your Wireless Network
Wireless > Basic Wireless Settings
Cisco WRP400 User Guide
The options on the page change after you choose Manual or Wi-Fi Protected
Setup.
•
Choose Manual if you want to manually configure your network, if you are
setting up your secondary network (SSID2), of if you do not have client
devices that support Wi-Fi Protected Setup. See
the Network," on page
•
Choose Wi-Fi Protected Setup if you have client devices, such as wireless
adapters, that support Wi-Fi Protected Setup. For more information, see
"Wi-Fi Protected Setup," on page
Manual Configuration of the Network
After you choose Manual for the Wireless Configuration method, additional fields
appear. You can change the SSID of the wireless network and enable a second
network, or guest network.
Figure 24 Wireless > Basic Wireless Settings > Manual Configuration
•
Network Mode: Select the wireless standards that are running on your
network. If you have Wireless-G and Wireless-B devices, keep the default
setting, Mixed. If you have only Wireless-G devices, select Wireless-G only.
If you have only Wireless-B devices, select Wireless-B only.
•
Wireless Channel: Select the channel that you want to use. To allow the
WRP400 to select the best available wireless channel, keep the default,
Auto.
52.
54.
6
"Manual Configuration of
52