Cisco Small Business WRP400 User Manual page 122

Interactive Voice Response Menu
Menu Commands
Cisco WRP400 User Guide
Action Command
Enter IVR Menu ****
Check DHCP 100
Check IP 110
Address
Check Subnet 120
Mask
Check Static 130
Gateway IP
Address
Check MAC 140
Address
Check Firmware 150
Version
Voice Factory 73738
Reset of the
Router
Warning: All
custom settings
will be lost.
Choices Description
Use this command to enter
the IVR Menu. Ignore
Special Information Tones
(SITs) or other tones until
you hear, "Configuration
menu. Please enter the
option followed by the #
(pound) key, or hang up to
exit."
The IVR announces
whether DHCP is enabled
or disabled.
The IVR announces the
current IP address of the
WRP400.
The IVR announces the
current subnet mask of the
WRP400.
The IVR announces the
current gateway IP
address of the WRP400.
The IVR announces the
MAC address of the
WRP400 in hexadecimal
string format.
The IVR announces the
version number of the
firmware running on the
WRP400.
Confirm - After the WRP400
Press 1. requests confirmation,
press 1 to confirm.
Cancel -
Press * After you hear, "Option
(star). successful", hang up the
phone. All voice settings
will be reset to their
defaults.
12
120