Administration
Administration > Firmware Upgrade
NOTE
Administration > Firmware Upgrade
Cisco WRP400 User Guide
•
Restore Voice Factory Defaults: To reset the voice settings to the default
values, select Yes. Then click Save Settings. Any custom Voice settings you
have saved will be lost when the default settings are restored.
Restoring the voice defaults may require your login (the default user name and
password are admin). If the defaults do not work, contact your service provider for
more information.
The Firmware Upgrade screen allows you to upgrade the firmware of the
WRP400. Do not upgrade the firmware unless you are experiencing problems with
the WRP400 or the new firmware has a feature you want to use.
If you want to upgrade the firmware, then you may need a user name and
password available only from your service provider. Contact your service provider
for more information.
Username & Password
If you see the Username & Password screen, enter the User Name and Password
provided by your service provider. (The factory default User Name and Password
are admin.) Then click OK.
Figure 50 Administration > Username & Password
9
97