Cisco Small Business WRP400 User Manual page 144

Regulatory Information
Suomi
Svenska
CE Marking
Cisco WRP400 User Guide
For all products, the Declaration of Conformity (DofC) is available through one or
more of these options:
• A pdf file is included on the product's CD.
• A print copy is included with the product.
• A pdf file is available on the product's webpage. Visit
smallbusiness.
If you need any other technical documentation, see
Information.".
The following standards were applied during the assessment of the product
against the requirements of the Directive 1999/5/EC:
• Radio: EN 300 328 and/or EN 301 893 as applicable
• EMC: EN 301 489-1, EN 301 489-17
• Safety: EN 60950 and either EN 50385 or EN 50371
Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) are
required for operation in the 5 GHz band.
DFS: The equipment meets the DFS requirements as defined in ETSI EN 301 893.
This feature is required by the regulations to avoid interference with Radio
Location Services (radars).
TPC: For operation in the 5 GHz band, the maximum power level is 3 dB or more
below the applicable limit. As such, TPC is not required.
For the Wireless-N, -G, -B, and/or -A products, the following CE mark, notified body
number (where applicable), and class 2 identifier are added to the equipment.
www.cisco.com/go/
Appendix E, "Additional
C
142