Access Restrictions > Internet Access - Cisco RB-WRT54GS2 - Wireless-G Broadband Router User Manual

Chapter 3
Access Restrictions > Internet Access
The Access Restrictions > Internet Access screen allows you
to block or allow specific kinds of Internet usage and
traffic, such as Internet access, designated services, and
websites during specific days and times.
Access Restrictions > Internet Access
Internet Access
Internet Access Policy Access can be managed by a
policy. Use the settings on this screen to establish an
access policy (after Save Settings is clicked). Selecting a
policy from the drop-down menu will display that policy's
settings. To delete a policy, select that policy's number
and click Delete. To view all the policies, click Summary.
(Policies can be deleted from the Summary screen by
selecting the policy or policies and clicking Delete. To
return to the Internet Access tab, click Close.)
Internet Policy Summary
Status Policies are disabled by default. To enable a policy,
select the policy number from the drop-down menu, and
select Enable.
Wireless-G Broadband Router with SpeedBooster
Advanced Configuration
To create an Internet Access policy:
1. Select a number from the
down menu.
2. To enable this policy, select
3. Enter a Policy Name in the field provided.
Edit List of PCs to select which computers will be
4. Click
affected by the policy. The List of PCs screen appears. You
can select a computer by MAC Address or IP Address.
You can also enter a range of IP Addresses if you want
this policy to affect a group of computers. After making
your changes, click Save Settings to apply your changes
or Cancel Changes to cancel your changes. Then click
Close.
List of PCs
5. Select the appropriate option,
depending on whether you want to block or allow
Internet access for the computers you listed on the List
of PCs screen.
6. Decide which days and what times you want this policy
to be enforced. Select the individual days during which
the policy will be in effect, or select Everyday. Then
enter a range of hours and minutes during which the
policy will be in effect, or select 24 Hours.
7. Select any Blocked Services or Website Blocking you
wish to use.
8. Click Save Settings to save the policy's settings, or
click Cancel Changes to cancel the policy's settings.
Blocked Services
You can filter access to various services accessed over the
Internet, such as FTP or telnet, by selecting services from
the drop-down menus next to Blocked Services. (You can
block up to 20 services.) Then enter the range of ports you
want to filter.
If the service you want to block is not listed or you want to
edit a service's settings, then click Add/Edit Service. Then
the Port Services screen will appear.
Internet Access Policy drop-
Enable.
Deny or Allow,
16