Status > Local Network; Local Network; Dhcp Server - Cisco Small Business WRP400 User Manual
Wireless-g broadband router with 2 phone ports
Hide thumbs
Also See for Small Business WRP400:
- Regulatory compliance and safety information manual (35 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (173 pages)
Table of Contents
Advertisement
Using the Status Screens
Status > Local Network
Status > Local Network
Cisco WRP400 User Guide
The Local Network screen displays information about the local, wired network.
Figure 56 Status > Local Network
Local Network
•
Local MAC Address: The MAC address of the local, wired interface of the
WRP400 is displayed.
•
Router IP Address: The IP address of the WRP400, as it appears on your
local network, is displayed.
•
Subnet Mask: The Subnet Mask of the WRP400 is displayed.
DHCP Server
•
DHCP Server: The status of the DHCP server function is displayed.
•
Start IP Address: For the range of IP addresses used by devices on your
local network, the starting IP address is displayed.
•
End IP Address: For the range of IP addresses used by devices on your
local network, the ending IP address is displayed.
•
DHCP Clients Table: Click this button to view a list of computers that are
using the WRP400 as a DHCP server.
10
106
Advertisement
Table of Contents
Troubleshooting
