Wireless > Wireless Mac Filter - Cisco LINKSYS WRT54G2 User Manual

Wireless-g broadband router
Hide thumbs Also See for LINKSYS WRT54G2:
Table of Contents

Advertisement

Chapter 3
Security Mode > RADIUS
IMPORTANT:
If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server Address
Enter the IP Address of the
RADIUS server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 1812.
Shared Key
Enter the key shared between the Router
and the server.
Default Transmit Key
Select a Default Transmit Key
(choose which Key to use). The default is 1.
WEP Encryption
Select a level of WEP encryption,
64 bits 10 hex digits or 128 bits 26 hex digits. The
default is 64 bits 10 hex digits.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Wireless-G Broadband Router
Advanced Configuration
Security Mode > WEP
Default Transmit Key
Select a Default Transmit Key
(choose which Key to use). The default is 1.
WEP Encryption
Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits. The default is
64 bits 10 hex digits.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network's
radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Wireless MAC Filter
To filter wireless users by MAC Address,
either permitting or blocking access, click Enable. If you do
not wish to filter users by MAC Address, keep the default
setting, Disable.
Prevent
Select this to block wireless access by MAC
Address. This button is selected by default.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents