Checking the Current Settings
Checking the Current Settings
This section explains the basic operational procedure for report printing. With report printing, you can
check the current settings of the machine.
Printing Reports
You can print and check the configuration or
the job logs of the machine.
Reference
For details on the reports you can print and the structure
of the [Reports] menu, refer to
Press the <SETTING> key.
1
Make sure [Reports] is selected and
2
then press
.
OK
If you want to print the [Menu Map], follow
procedure 4.
Press the
to select the category to
3
which the report you want to print
belongs and then press
Press
to select the report you want to
4
print and then press
If the entry screen for the admin
password, enter the admin password and
select [Enter], and then, press
Press the
or
5
confirmation message and then press
Note
When [Admin Setup]>[Management]>[System
Setup]>[Allow All Reports To Print] is [Disable], the
admin password is required for printing the following
reports.
- Scan To Log
- Speed Dial List
- Address Group List
- Communication Management Report (Fax)
- Communication Management Report (Email / Internet
Fax)
- Email Address List
"Reports" P.
73.
.
OK
.
OK
.
OK
to select [Yes] on the
.
OK
- 72 -