Configuring Secure Protocols; Printing Without Printer Driver (Direct Print) - Oki MB441MFP User Manual

Changing Network Settings From the Web Page
Enter attribute names to be searched for
9
as the user name in [User Name].
Be sure to specify a value for [Name 1].
Enter an e-mail address to be searched
10
for in [Mail Address].
If necessary, specify a search condition
11
in [Additional Filters].
Select the authentication method you
12
want in [Method].
Note
 When you select [Anonymous] or [Simple], user
authentication using LDAP fails. You need to select
[Digest-MD5] or [Secure Protocol] if you configure
the LDAP server for user authentication.
Memo
 When you select [Digest-MD5], you need to
configure the DNS server setting.
 When you select [Secure Protocol], you need to
configure the DNS server and the secure protocol
server settings.
If you do not select [Anonymous] in
13
step 12, specify the user ID and
password to log in to the LDAP server.
Select the encryption method in
14
[Encryption].
Click [Send].
15
The network card reboots to enable the new
settings.

Configuring Secure Protocols

Authentication using the Kerberos server is
available when you access the LDAP server. In
order to use the secure protocol, be sure to
complete the SNTP and DNS server settings.
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[Secure
3
Protocol Server Setting].
Enter a realm name in [Domain Name].
4
Click [Send].
5
The network card reboots to enable the new
settings.
Printing Without Printer Driver
(Direct Print)
Printing PDF Files
You can print PDF files without installing the
printer driver. Specify the file you want to print
on the web page and sent it to the machine.
Memo
 Additional RAM memory may be necessary depending on
the PDF file.
 Printing may not be correct depending on the PDF file.
When printing is not correct, open the file with Adobe
Reader and then print.
Access the machine's web page.
1
Click [Direct Print].
2
Select [Web Printing].
3
Follow the on-screen instructions to
4
specify detailed settings.
Check the settings and then click [OK].
5
The data is sent to the machine and the printing is
started.
Configuring Server to Print Files
Attached to E-mails
You can print a file that the machine receives as
an attachment to an e-mail.
Memo
 Up to 10 files can be printed. The maximum size for each
file is 8 MB.
 PDF, JPEG, and TIFF files can be printed.
 Additional RAM memory may be necessary depending on
the PDF file.
 Printing may not be correct depending on the PDF file.
When printing is not correct, open the file with Adobe
Reader and then print.
 Configuration for POP
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[E-mail]>
3
[Receive Settings].
Select [POP3] and then click [To
4
STEP2].
- 158 -