Select [Authenticate Server] and then
8
click [Import].
Enter the file name of the CA certificate
9
and then click [OK].
Specify the certificate issued by the certificate
authority, which is the certificate authority from
which the RADIUS server obtained the certificate.
A PEM, DER, and PKCS#7 file can be imported.
Click [Send].
10
The network card reboots to enable the new
settings.
When the standby screen appears on the
11
machine, hold down the power switch for
about a second to turn off the power.
Go to
"Connecting Your Machine to
12
Authentication Switch" P.
Using EAP-TLS
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>
3
[IEEE802.1X].
Select [Enable] for [IEEE802.1X].
4
Select [EAP-TLS] for [EAP Type].
5
Enter a user name in [EAP User].
6
Select [Do not use SSL/TLS
7
Certificate for EAP authentication]
and then click [Import].
Enter the file name of the certificate.
8
Only a PKCS#12 file can be imported.
Enter the password of the certificate and
9
then click [OK].
Select [Authenticate Server] and then
10
click [Import].
Enter the file name of the CA certificate
11
and then click [OK].
Specify the certificate issued by the certificate
authority, which is the certificate authority from
which the RADIUS server obtained the certificate.
A PEM, DER, and PKCS#7 file can be imported.
Click [Send].
12
The network card reboots to enable the new
settings.
157.
- 157 -
Changing Network Settings From the Web Page
When the standby screen appears on the
13
machine, hold down the power switch for
about a second to turn off the power.
Go to
"Connecting Your Machine to
14
Authentication Switch" P.
Connecting Your Machine to
Authentication Switch
Make sure that the machine is turned off.
1
Connect an Ethernet cable to the
2
network interface port.
Connect the Ethernet cable to the
3
authentication port of an authentication
switch.
Hold down the power switch for about a
4
second to turn on the power.
Set up the machine.
5
Reference
For details on the initial setup, refer to the User's
Manual Basic.
Configuring LDAP Server
Reference
For details on the LDAP server and encryption setting,
refer to your network administrator.
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[LDAP
3
Server Setting].
Enter the domain name or IP address of
4
the LDAP server in [LDAP Server].
Enter the port number of the LDAP
5
server in [Port Number].
Specify a value of time-out to wait for
6
the search results in [Timeout].
Specify a value for the maximum number
7
of entries into the search results in
[Max. Entries].
Specify a BaseDN to access the LDAP
8
server in [DN Name].
157.
8