Copying; Useful Functions; Sorting Copies (Sort); Combining Multiple Pages Onto One Sheet Of Paper (N-In-1) - Oki MB441MFP User Manual

1. Copying

This chapter explains your machine's various copy functions.

Useful Functions


This section explains your machine's useful copy functions. The functions explained below are enabled
from the [Change settings] menu of the copy start screen.
Memo
 The following procedures are explained under the assumption that [Continue Scan] is disabled. For the basic procedures when
[Continue Scan] is enabled, refer to the User's Manual Basic.

Sorting Copies (Sort)

When the sort function is enabled, data is
outputted by making one copy according to page
number. Since the machine collates copies, this
function saves you the effort of sorting copies
manually. In the factory default, the sort function
is not enabled.
Press the <COPY> key.
1
Place your document with text face up in
2
the ADF or face down on the document
glass.
Press the to enter the [Change
3
settings] menu.
Press the to select [Sort] and then
4
press .
OK
Press the to select [ON] and then
5
press .
OK
Press the until the copy standby screen
6
appears.
Enter the number of copies required.
7
Press .
8
M
ONO
Reference
 The continuous scan mode allows you to copy multiple
documents at once. You can use both the ADF and
document glass for a single job if you use the continuous
scan mode. For details, refer to the User's Manual Basic.
Combining Multiple Pages
Onto One Sheet of Paper (N-
in-1)
This function allows you to copy multiple pages
of documents onto one side of a single sheet of
paper. Two or four pages can be printed onto one
side.
 Two pages
The direction to inserting a document
 Four pages →
The direction to inserting a documentt
 Four pages →
The direction to inserting a document
Note
 Place your document so that the top is scanned in first.
 Specify the appropriate orientation of the image in
[Direction] to get the copy result you want.
 [Zoom] is automatically set to [Auto] when [N-in-1] is
enabled. To specify the desired zoom ratio, set [N-in-1]
first and then set [Zoom].
- 10 -
Vertical setting
Horizontal setting