Checking Current Settings; Interfaces And Connection - Oki ES 3640e MFP User Manual

3. Even if you are using your MFP only for printing, please
ensure that the scanner unit is turned on.

Checking current settings

Carry out the following steps to generate a Configuration report
(Menu Map) to confirm that your printer unit is correctly
configured.
1. Ensure that there is Letter paper in Tray 1 (to be used in
this operation).
2. Ensure that the display panel indicates that the printer is
ready to print.
3. Press the Up-arrow or Down-arrow buttons repeatedly
until Print Pages is highlighted.
4. Press the Enter button to select Print Pages.
5. Press the Up-arrow or Down-arrow buttons repeatedly
until Configuration is highlighted.
6. Press the Enter button to select Configuration.
7. Press the Enter button to execute the command and a
Configuration document is printed.
8. After printing the configuration document, the printer unit
returns to the ready to print status.
9. You can use this document to check your printer unit
configuration. System values and installed accessories are
listed at the top of the first page while status values and
settings follow.

Interfaces and connection

Your printer unit is equipped with a selection of data interfaces:
> Parallel – For direct connection to a PC. This port
requires a bi-directional (IEEE 1284 compliant) parallel
cable.
> USB – For connection to a PC running Windows 98 or
above (not Windows 95 upgraded to Windows 98) or
Macintosh. This port requires a cable conforming to USB
version 2.0 or above.
ES3640e MFP User's Guide
Getting started > 50