Pressing Dial Twice (Confirm Dial) - Oki MB441MFP User Manual

Security Functions
Press the to select [Broadcast
7
Destination] and then press
Press the to select [ON] and then
8
press .
OK
Press the until the top screen appears.
9
 Operation
Place your document with text face up in
1
the ADF or face down on the document
glass.
Press the <FAX/HOOK> key.
2
Check that [Fax] is selected and press
3
to open the fax start screen.
OK
Check that [Add Destination] is
4
selected and then press
Specify all the destinations.
5
Press .
6
M
ONO
A fax number confirmation screen is displayed.
[Please press Start key to begin
7
transmission. To delete, select address
and press Delete.] appears.
If specified all the destination appears,
8
press .
M
ONO
If necessary, press
you want to delete and then press the
[Delete The Address] and then press
Press to start transmission.
9
M
ONO
Memo
 If the destination number entered with the ten-key pad is
wrong, delete it and re-specify the correct one.
 When many destinations are specified, you may not be
able to check all of them at one time. To check all the
destinations, press the

Pressing Dial Twice (Confirm Dial)

This function requires you to re-enter the
destination number when you enter a destination
using the ten-key pad. The fax is sent only if the
two numbers match.
.
OK
.
OK
to select the destination
OK
. Select
.
OK
to scroll the screen.
Memo
 The confirm dial function is unavailable when you specify
the destination using speed dial.
 If you use symbols in the destination number, re-enter the
symbols also.
 The confirm dial function is done first when [Check
broadcast dest.] is also enabled.
 You cannot use the dial double-press function with manual
sending.
 Configuration
Press the <SETTING> key.
1
Press the
2
and then press
Enter the administrator password.
3
Select [Enter] and then press
4
Press the
5
then press
Press the
6
Function] and then press
Press the
7
and then press
Press the
8
press .
OK
Press the
9
 Operation
Place your document with text face up in
1
the ADF or face down on the document
glass.
Press the <FAX/HOOK> key.
2
Enter a destination number using the
3
ten-key pad.
Select [Enter] and then press
4
A screen that requires you to re-enter the
destination number appears.
Enter the destination number again using
5
the ten-key pad.
Select [Enter] and then press
6
The fax start screen appears.
Press
7
M
ONO
- 26 -
to select [Admin Setup]
.
OK
to select [Fax Setup] and
.
OK
to select [Security
.
OK
to select [Confirm Dial]
.
OK
to select [ON] and then
until the top screen appears.
to start transmission.
.
OK
.
OK
.
OK