Advanced Mode - Oki MB441MFP User Manual

Using Drivers and Software
Click [Settings].
3
A window appears.
Click the scan button to change the
4
settings.
Click [OK].
5
If you start a scan job, click the scan
6
button.
If you want to finish the setting, click [Quit].
 Advanced Mode
You can adjust in detail how a document is
scanned.
Follow the procedure for
1
Job (for Windows)" P. 39
Select [Advanced] from [Mode].
2
Change the settings if necessary.
3
Click [Scan] to start scanning.
4
If you want to finish the setting, click [Quit].
Reference
 For details on how to change each setting, refer to the
online help.
Starting a Scan Job (for Mac OS X)
Press the <SCAN> key on the operator
1
panel.
Place your document with text face up in
2
the ADF or face down on the document
glass.
Press the to select [Remote PC] and
3
then press .
OK
Start Adobe Photoshop CS3 on your
4
computer.
"Starting a Scan
through step 6.
- 40 -
Select [Import] from [File] and then select
5
[OKI MB4x1_ES41x1_MPS42x USB] or
[OKI MB4x1_ES41x1_MPS42x
Network].
- When [OKI MB4x1_ES41x1_MPS42x USB] is
selected, proceed to step 9.
- When [OKI MB4x1_ES41x1_MPS42x Network] is
selected, the network scan is the second or later
time, proceed to step 9.
For the first network scan, the dialog box
6
indicating that the tool for selecting a
connection destination is started is
displayed. Then, click [OK].
On the dialog box of [Scan Settings],
7
select a connection destination to
register host information if necessary,
and then click [OK].
Select [Import] from [File] of Adobe
8
Photoshop CS3 and select [OKI
MB4x1_ES41x1_MPS42x Network].
The windows appears.
Click the scan button.
9
Scanning starts.
Select [Quit Photoshop] from
10
[Photoshop].
Changing Settings (for Macintosh)
You can adjust how the document is scanned by
changing the driver setting.
The following explains the setting items.
 Simple Mode
You can change the settings of five registered
buttons.
Follow the procedure for "Starting a Scan
1
Job (for Mac OS X)" through step 8.
Select [Simple] from [Mode].
2
Click [Settings].
3
A window appears.
Click the scan button to change the
4
settings.
Click [OK].
5
If you start a scan job, click the scan
6
button.
If you want to finish the setting, click [Quit].