Using Snmpv3 - Oki MB441MFP User Manual

 You need to set the mail server to allow the machine to
send an e-mail. For details on the mail server setting, refer
to your network administrator.
 If you use Internet Explorer 7, be sure to configure the
settings below before you send a test mail. In the browser,
select [Tools] > [Internet Options], then click [Custom
Level] on the [Security] tab. Then select [Enable] in
[Allow websites to prompt for information using
scripted windows].
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[E-mail]>
3
[Send Settings].
Follow the on-screen instructions to
4
specify detailed settings.
Select [Set detail of the SMTP
5
Protocol].
If necessary, you can configure
6
[Security Settings], [Configure
attached information], and [Others].
Click [Send].
7
The network card reboots to enable the new
settings.
Regular Alert
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[E-mail]>
3
[Alert Settings].
Enter an e-mail address to receive the
4
alerts.
Click [Setting] for the specified address.
5
[ ] is useful when you want to apply the alert
Copy
conditions to another address..
Follow the on-screen instructions to
6
specify detailed settings.
Click [OK].
7
Click [View a summary of current
8
configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
Changing Network Settings From the Web Page
Click [Send].
9
The network card reboots to enable the new
settings.
Memo
 If there is no error specified, the alert e-mail is not sent.
Alert At Time of Error Occurrence
Perform steps 1 to 6 in
1
When an error or warning is selected to require
notification, a window will display to specify the
time between error occurrence and sending the
alert.
Specify the time to sending of an error
2
alert and then click [OK].
If you specify a longer time, you are only notified
of persisting errors.
Click [OK].
3
Click [View a summary of current
4
configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
Click [Send].
5
The network card reboots to enable the new
settings.

Using SNMPv3

When you use the SNMP manager that supports
SNMPv3, the management of the machine is
encrypted by SNMP.
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[SNMP]>
3
[Setting].
Follow the on-screen instructions to
4
specify detailed settings.
Click [Send].
5
The network card reboots to enable the new
settings.
Memo
 Your machine has an SNMP agent. You can confirm and
change the machine settings by a commercially available
SNMP agent. For the MIB of the machine, refer to the
software DVD-ROM and check the "README" file in the
[Misc] > [MIB] folder.
- 155 -
"Regular Alert".
8