Using Snmpv3; Using Ieee802.1X (Wired Lan) - Oki MC573 Advanced Manual

Using SNMPv3

If you use an SNMP manager that supports SNMPv3, you can encrypt the machine
management with SNMP.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [SNMP] > [Settings].
5
Specify detailed settings by following the on-screen instructions.
6
Click [Submit].
The new settings take effect when the network function of this machine restarts.
You can confirm and change the machine settings with a commercially available SNMP manager tools. For the MIB
in the machine, refer to the "Software DVD-ROM", and check the "README" file in the [Misc] > [MIB Files] folder.

Using IEEE802.1X (Wired LAN)

This machine supports IEEE802.1X authentication. With this authentication function, you can
set the machine, that is connected to a network, deny connection except for specific
computers.
Setting by Using PEAP
Setting by Using EAP-TLS
Setting by Using PEAP
EAP authentication must be performed after computer connection is authenticated by
enabling IEEE802.1X. This section describes how to set PEAP, which is an EAP
authentication type.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [IEEE802.1X].
5
Select [Enable] from [IEEE802.1X].
6
Select [PEAP] from [EAP Type].
7
Enter a user name in [EAP User].
8
Enter a password in [EAP Password].
9
Select [Authenticate Server], and then click [Import].
10
Enter the file name of the CA certificate, and then click [OK].
Specify the certificate issued by the certificate authority that the RADIUS server
obtained. You can import a PEM, DER, and PKCS#7 file.
11
Click [Submit].
The new settings take effect when the network function of this machine restarts.
12
Turn the machine off after this machine becomes online.
- 419 -
11. Utility Software