Fc-Pga/Fc-Pga2 Packages; Fc-Pga/Fc-Pga2 Packages); Fc-Pga Mechanical Specifications; Package Dimensions (Fc-Pga Package) - Intel CELERON 1.10 GHZ Datasheet

® ®
Intel Celeron Processor up to 1.10 GHz
5.3

FC-PGA/FC-PGA2 Packages

This section defines the mechanical specifications and signal definitions for the Intel Celeron
processor in the FC-PGA and FC-PGA2 packages.
5.3.1

FC-PGA Mechanical Specifications

Figure 23
where pin-side capacitors will be located on the processor.
these dimensions in both inches and millimeters.
Figure 23. Package Dimensions (FC-PGA Package)
NOTES:
1. Unless otherwise specified, the following drawings are dimensioned in inches.
2. All dimensions provided with tolerances are guaranteed to be met for all normal production product.
3. Figures and drawings labeled as "Reference Dimensions" are provided for informational purposes only.
Reference dimensions are extracted from the mechanical design database and are nominal dimensions with
no tolerance information applied. Reference dimensions are NOT checked as part of the processor
manufacturing. Unless noted as such, dimensions in parentheses without tolerances are reference
dimensions.
4. Drawing not to scale.
92
is provided to aid in the design of heatsink and clip solutions as well as demonstrate
Table 51 provides the measurements for
Datasheet