Table of Contents
Advertisement
The following sections provide instructions for starting the SCSISelect Utility
program and descriptions of the menu choices available.
Starting the SCSISelect Utility program
Complete the following steps to start the SCSISelect utility program:
1. Turn on the server.
2. When the <<< Press <CTRL><A> for SCSISelect Utility! >>> prompt appears,
3. When the Would you like to configure the host adapter or run the SCSI
4. Use the arrow keys to select a choice from the menu.
5. Follow the instructions on the screen to change the settings of the selected
press Ctrl+A.
Note: If an administrator password has been set, you are prompted to type the
password to start the SCSISelect Utility program.
disk utility? question appears, make your selection and press Enter.
items, and press Enter.
Chapter 2. Configuring your server
17
Advertisement
Table of Contents
Troubleshooting
