IBM 8480 - Eserver xSeries 205 Maintenance And Troubleshooting Manual page 108

Note: See "System" on page 112 to determine which components should be replaced by a field service technician.
Error code/symptom
289
(DIMM disabled by the user or system.)
301
(Keyboard or keyboard controller error)
303
(Keyboard controller error)
602
(Invalid diskette boot record)
604
(Diskette drive error)
662
(Diskette drive configuration error)
962
(Parallel port error)
11XX
(System board serial port 1 or 2 error)
1762
(Hard drive configuration error, IDE only.)
178X
(Hard drive error, IDE only.)
1800
(No more hardware interrupt available for
PCI adapter.)
1801
(No more ROM space available for PIC
adapter.)
98
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. Keyboard
2. System board
v System board
1. Diskette
2. Diskette drive
3. Drive cable.
4. System board
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Hard disk drive.
2. Hard disk cables.
3. Run the Configuration/Setup Utility program.
4. System board.
1. Hard disk cables.
2. Hard disk adapter.
3. Hard disk drive.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Remove adapter.
1. Run the Configuration/Setup Utility program.
2. Remove adapter.
3. Disable the adapter BIOs and run the Configuration/Setup Utility
program.