IBM 8480 - Eserver xSeries 205 Maintenance And Troubleshooting Manual page 104

Note: See "System" on page 112 to determine which components should be replaced by a field service technician.
Error code/symptom
264-XXX-0NN
(Failed tape drive test.)
264-XXX-999
(Errors on multiple tape drives, see error
text for more info.)
301-XXX-000
(Failed keyboard test.)
405-XXX-000
(Failed Ethernet test on controller on the
system board.)
405-XXX-00N
(Failed Ethernet test on adapter in PCI slot
n.)
415-XXX-000
(Failed Modem test.)
94
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Tape cartridge, if user executed the Read/Write Tape Drive test
(failure code of XXX = 256).
2. SCSI or power cable connected to tape drive with SCSI ID nn.
3. Tape drive with SCSI ID nn (refer to the Help and Service
Information appendix of the tape drive's User Guide).
4. System board or SCSI controller (run SCSI controller diagnostic to
determine if the SCSI bus is functioning properly.)
v See error messages/text in the PC Doctor error log for detailed
information on each individual tape drive error.
v Keyboard.
1. Verify that Ethernet is not disabled in BIOS.
2. System board.
1. Adapter in PCI slot n.
2. System board.
1. Cable.
Note: Ensure modem is present and attached to server.
2. Modem.
3. System board.