Table of Contents
Advertisement
Power supply
Note:
To remove the power supply, do the following:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the cover. See "Removing the side cover" on page 40.
4. Disconnect internal cables from the planar and drives.
5. Remove the screws from the rear of the server.
6. Gently move the power supply away from the chassis and lift it out of the
v Read "Safety information" on page 119.
v Read "System reliability considerations" on page 33.
server.
Chapter 5. Field replaceable units
73
Advertisement
Table of Contents
Troubleshooting
