Main Switch - DAELIM DAYSTAR Service Manual

Main Switch

Inspection
Remove the fuel tank. Disconnect the main
switch code coupler connection. Check for
continuity between terminals in each switch
position. There should be a continuity between
the colour coded wire. (○
IG
OFF
ON
Color Code Black/White
Removal
Remove the combination switch upper/under
cover.
Remove the 4 tapping screw from the meter
stay.
Remove the main switch coupler.
Remove the main switch
Installation
Install the main switch in the reverse order of
removal.
Engine Stop Switch
When happening the urgent situation during
driving, it is equipment for operating the
engine stop to "OFF" position and braking the
engine.
△
CAUTION
!
• After checking for being "RUN" position
before starting, start the main switch in "ON"
position.
○)
E BAT
1
Green Red Black
BAT
2
Cable Guide Cable Guide
Cable Guide Cable Guide
Cable Guide Cable Guide Cable Guide Cable Guide
Cable Guide Cable Guide
Cable Guide Cable Guide Cable Guide
Lights/Switches/Horn
Engine Stop Switch Engine Stop Switch
Engine Stop Switch Engine Stop Switch
Engine Stop Switch Engine Stop Switch Engine Stop Switch Engine Stop Switch
Engine Stop Switch Engine Stop Switch Engine Stop Switch Engine Stop Switch
Engine Stop Switch
19-7