DAELIM DAYSTAR Service Manual page 9

Safety Notices
Following marks indicate some warnings and caution against some specific service methods.
Mark
△
Indicates a strong possibility of
WARNING
!
severe personal injury or loss of
life if instructions are not
followed
The following symbols indicate needed lubrication steps, the changing of parts, and required specialized
tools, etc. when performing maintenance
Symbol
Use recommended engine oil,
unless otherwise specified
Use molybdenum oil solution
(mixture of the engine oil and
molybdenum grease with the
ratio 1:1)
Use multi-purpose grease
(Lithium based multi-purpose
grease NLGI #2 or equivalent)
Use molybdenum disulfide
grease (containing more than
3% molybdenum disulfide,
NLGI #2 or equivalent)
Use molybdenum disulfide
paste containing more than
40% molybdenum disulfide,
NLGI #2 or equivalent)
Use silicone grease
Apply a locking agent. Use the
agent of the middle strength,
unless otherwise specified
Special greases, etc. that do not correspond to the above are indicated without using symbols.
Meaning
Caution
Mark
Indicates a possibility of
personal injury or equipment
△
CAUTION
!
damage if instructions are not
followed.
Gives helpful information
NOTE
Symbol
Apply sealant
Replace the parts with new
ones before assembly
Use brake fluid, DOT3 or DOT4.
Use the recommended brake
fluid, unless otherwise specified.
CUSHION
Use Forkor Suspension Fluid
OIL
Use special tool
S TOOL
Use optional tool. These tools
O.P. TOOL
are obtained as you order parts
Indicates reference page.
(⇨ 3 - 1)
(Example: Refer to page 3-1)
General Information
Meaning
Caution
1-7