Switch Operation; Main Switch; Headlight·position Lamp - DAELIM DAYSTAR FI Owner's Manual

SWITCH OPERATION

MAIN SWITCH

Main switch is used to turn on or turn off
engine.
Key
Function
position
Starts engine. Used
to operate vehicle
during day or night
ON
time, to operate
horn, winker, brake
lights or
lights.
Stops engine. Cuts
OFF
off all electrical
circuits.
MAIN SWITCH
12
●Do not operate main switch key
during operation.
●If the main switch key is placed on
"Off" or "Lock"position, all
Key
removal
electrical system will not function.
●Never operate the main switch key
Cannot be
during travel as it might cause
removed
unexpected accidents.
●If it is necessary to remove the
main switch key, stop the vehicle
head
first prior to removing.
●Prior to dismounting from the
vehicle, make sure to lock the
Can be
removed
steering wheel and remove key.
●If the key is left in "ON" position
without starting engine, battery is
discharged.
●Do not use a number of keys
together with a metal key holder.
The keys and the key holder may
cause scratches or other damage to
the cover while operating the
vehicle.(Recommend cloth or
leather key holders)
CAUTION HEADLIGHT·POSITION LAMP
<TURNING ON HEADLIGHT>
Put main switch key in "ON" position and
turn on headlight switch.
Switch position Switch position
Headlight, position lamp
(H)
and taillight turned on
Position lamp and
(P)
taillight turned on.
Light turned off
●Position lamp (
advises approaching
vehicle of the motor cycle position when
operating after sunset. In addition, when
the motor cycle is stopped at night or at
an intersection, the position lamp advises
other vehicles of the motorcycle
existence without blinding operators.
<HEADLIGHT HIGH OR LOW BEAM OPERATION>
High beam or low beam can be operated
by the use of high/low beam switch.
(HI) ... Headlight placed on high beam
(LO) ... Headlight placed on low beam