DAELIM DAYSTAR Service Manual page 73

A.C Generator / Starter Clutch
● After installing the flywheel puller on the
rotor, remove the rotor.
Tool: Flywheel puller
● Remove the woodruff key from the crank
shaft.
● Remove the starter driven gear collar.
Stator Removal/Installation
● Loosen the pulse generator mounting screw
and remove the pulse generator.
● Loosen the screw and remove the wire guide.
● Remove the stator mounting screw and remove
the stator. Assemble and install in the reverse
order of disassembly removal.
NOTE
• Make sure that the grommet is correctly placed
on the slot.
7-4
Flywheel Puller
Starter Driven Gear Collar Starter Driven Gear Collar
Starter Driven Gear Collar Starter Driven Gear Collar
Starter Driven Gear Collar Starter Driven Gear Collar Starter Driven Gear Collar Starter Driven Gear Collar
Starter Driven Gear Collar Starter Driven Gear Collar Starter Driven Gear Collar Starter Driven Gear Collar
Starter Driven Gear Collar
Woodruff Key Woodruff Key
Woodruff Key Woodruff Key
Woodruff Key Woodruff Key Woodruff Key Woodruff Key
Woodruff Key Woodruff Key
Woodruff Key Woodruff Key Woodruff Key
Pulse Generator Pulse Generator
Pulse Generator Pulse Generator
Pulse Generator Pulse Generator Pulse Generator Pulse Generator
Pulse Generator Pulse Generator
Pulse Generator Pulse Generator Pulse Generator
Grommet Grommet Grommet Grommet
Grommet Grommet Grommet Grommet
Grommet Grommet
Grommet Grommet Grommet
Wire Guide Wire Guide Wire Guide Wire Guide
Wire Guide Wire Guide
Wire Guide Wire Guide Wire Guide Wire Guide
Wire Guide Wire Guide Wire Guide
Stator Stator
Stator Stator
Stator Stator Stator Stator
Stator Stator Stator Stator
Stator