Brocade Communications Systems 8 Command Reference Manual page 942

2
supportSave
To collect support information on a Brocade 5100 and save it to an attached USB device timeout
values are doubled):
To run supportSave without confirmation on a Brocade DCX with AP blades included using
supportFTP parameters (only Active CP output is shown):
910
Saving support information for chassis:HL_5100_66, module:RAS...
Saving support information for chassis:HL_5100_66, module:TRACE_OLD...
Saving support information for chassis:HL_5100_66, module:TRACE_NEW...
Saving support information for chassis:HL_5100_66, module:FABRIC...
Saving support information for chassis:HL_5100_66, module:CORE_FFDC...
Saving support information for chassis:HL_5100_66, module:DIAG...
Saving support information for chassis:HL_5100_66, module:RTE...
Saving support information for chassis:HL_5100_66, module:ISCSID_DBG...
Saving support information for chassis:HL_5100_66, module:AGDUMP...
Saving support information for chassis:HL_5100_66, module:SSHOW_PLOG...
Saving support information for chassis:HL_5100_66, module:SSHOW_OS...
Saving support information for chassis:HL_5100_66, module:SSHOW_EX...
Saving support information for chassis:HL_5100_66, module:SSHOW_FABRIC...
Saving support information for chassis:HL_5100_66, module:SSHOW_SERVICE...
Saving support information for chassis:HL_5100_66, module:SSHOW_SEC...
Saving support information for chassis:HL_5100_66, module:SSHOW_NET...
......(output truncated)
switch:admin> supportsave -U -d -t 2 mysupportsave
This command will collect RASLOG, TRACE, supportShow, core file, FFDC data
and other support information and then transfer them to a FTP/SCP server
or a USB device. This operation can take several minutes.
NOTE: supportSave will transfer existing trace dump file first, then
automatically generate and transfer latest one. There will be two trace dump
files transferred after this command.
OK to proceed? (yes, y, no, n): [no] y
Saving support information for chassis:ras095_chassis, module:RAS...
Saving support information for chassis:ras095_chassis, module:TRACE_OLD...
Saving support information for chassis:ras095_chassis, module:TRACE_NEW...
Saving support information for chassis:ras095_chassis, module:FABRIC...
Saving support information for chassis:ras095_chassis, module:CORE_FFDC...
No core or FFDC data files found!
Saving support information for chassis:ras095_chassis, module:DIAG..
Saving support information for chassis:ras095_chassis, module:RTE...
Saving support information for chassis:ras095_chassis, module:ISCSID_DBG...
Saving support information for chassis:ras095_chassis, module:AGDUMP...
Saving support information for chassis:ras095_chassis, module:SSHOW_PLOG...
(output truncated)
switch:admin> supportsave -n -c
Saving support information for chassis:ras020_chassis, module:RAS............
Saving support information for chassis:ras020_chassis, module:TRACE_OLD...
Saving support information for chassis:ras020_chassis, module:TRACE_NEW...
Saving support information for chassis:ras020_chassis, module:FABRIC.......
Saving support information for chassis:ras020_chassis, module:CORE_FFDC...
Saving support information for chassis:ras020_chassis, slot:4...
slot 4 support file transfer done.
Saving support information for chassis:ras020_chassis, slot:12...
slot 12 support file transfer done.
Saving support information for chassis:ras020_chassis, module:DIAG.....
Saving support information for chassis:ras020_chassis, module:RTE...
Saving support information for chassis:ras020_chassis, module:ISCSID_DBG...
Saving support information for chassis:ras020_chassis, module:AGDUMP...
Fabric OS Command Reference
53-1001764-02