Brocade Communications Systems 8 Command Reference Manual page 816

2
portStats64Show
stat64_rateTxPeakByte
stat64_rateRxPeakByte
stat64_PRJTFrames Number of P_RJT frames transmitted.
stat64_PBSYFrames Number of P_BSY transmitted.
stat64_inputBuffersFull
stat64_rxClass1Frames
The following counters provided by SNMP are displayed with portStats64Show -long on switches
running Fabric OS v6.4.0 or later:
swConnUnitZeroTenancy, zero_tenancy
swConnUnitFLNumOfTenancy , fl_tenancy
swConnUnitNLNumOfTenancy , nl_tenancy
swConnUnitStopTenancyStarvation, Starve_stop
swConnUnitOpend, opened
swConnUnitTransferConnection, transfer
swConnUnitOpen , open
swConnUnitInvalidARB, er_inv_arb
The following counters are platform-specific and applicable only to Condor2 and Goldeneye2 ASICs
only. Refer to the Fabric OS Troubleshooting and Diagnostics Guide, Appendix A, for a table that
correlates ASIC type with switch models.
784
Tx peak Byte rate (Bps).
Rx peak Byte rate (Bps).
Number of occasions on which input buffers are full.
Number of class 1 frames received.
Number of times a zero tenancy occurred.
Number of times the FL_Port had a loop tenancy.
Number of times any NL_Port had a loop tenancy.
Number of loop tenancies stopped due to starvation.
Number of times the FL_Port entered OPENED state.
Number of times the FL_Port entered TRANSFER state.
Number of times the FL_Port entered OPEN state.
Number of invalid arbitrated loops (ARBs).
swConnUnitFTB1Miss , er_type1_miss
Number of frames with FTB type 1 miss.
swConnUnitFTB2Miss , er_type2_miss
Number of frames with FTB type 2 miss.
swConnUnitFTB6Miss, er_type6_miss
Number of frames with FTB type 2 miss.
swConnUnitZoneMiss, er_zone_miss
Number of frames with hard zoning miss
swConnUnitLunZoneMiss, er_lun_zone_miss
Number of frames with logical unit number (LUN) zoning miss.
Fabric OS Command Reference
53-1001764-02