Brocade Communications Systems 8 Command Reference Manual page 780

2
portShow
Operands This command has the following port operands:
slot
port
-i index1[-index2]
Examples To display the current state of a port:
748
For bladed systems only, specifies the slot number of the port to be displayed,
followed by a slash (/).
Specifies the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a listing of valid port numbers.
Specifies a port or a range of ports identified by port index numbers. You can
specify multiple index ranges separated by a space, for example, 33-38
40-60. Port indexes are supported only if PortSwap is disabled. They are not
supported on GbE ports and configured F_Port trunks. Use the -i option
without a port index argument to display the portSwap status, or alternately
use portSwapShow.
switch:admin> portshow 43
portIndex: 43
portName:
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x1000490b
LOGICAL_ONLINE LOGIN LED
portType: 18.0
POD Port: Port is licensed
portState: 1 Online
Protocol: FC
portPhys: 6 In_Sync
port generation number:
state transition count:
portId: 230100
portIfId: 43020009
portWwn: 20:2b:00:05:1e:07:c7:26
portWwn of device(s) connected:
Distance: normal
portSpeed: N4Gbps
LE domain: 0
FC Fastwrite: OFF
Interrupts: 0
Unknown: 0
Lli: 11
Proc_rqrd: 9877
Timed_out: 0
Rx_flushed: 0
Tx_unavail: 0
Free_buffer: 0
Overrun: 0
Suspended: 0
Parity_err: 0
2_parity_err: 0
CMI_bus_err: 0
switch:admin>
PRESENT ACTIVE E_PORT T_PORT T_MASTER G_PORT U_PORT
portScn: 16
0
1
Link_failure: 0
Loss_of_sync: 1
Loss_of_sig: 2
Protocol_err: 0
Invalid_word: 14
Invalid_crc: 0
Delim_err: 0
Address_err: 0
Lr_in: 2
Lr_out: 0
Ols_in: 0
Ols_out: 1
E_Port Trunk master port
Frjt:
Fbsy:
Fabric OS Command Reference
53-1001764-02
0
0