Brocade Communications Systems 8 Command Reference Manual page 650

2
portCfg
To delete a static IP route using an IPv4 address:
To create a network-wide permanent VLAN tag entry with a VLAN ID of 200 and an L2 CoS value of
5 (no destination address):
To display the VLAN tag configuration (for an explanation of the flags, refer to portShow):
To delete a VLAN tag entry:
Function Commands supported only on the Brocade 7800 and the Brocade FX8-24 platforms
Synopsis portcfg action [slot/]ve_port options arguments
Description Use this command to configure FCIP tunnels and FCIP circuits on the GbE/10GbE ports on the
Brocade 7800 and FX8-24 platforms only. The FCIP tunnels on the local and remote GbE ports act
as Virtual E_Ports (VE_Ports) connecting the local and remote fabrics. The following operations can
be performed with this command:
618
IPv6 Address Len
----------------------------------------------------------------
2000:: 64
2000::10 128
2000::11 128
2000::1:250 128
2001:: 64
fe80:: 64
ff01:: 32
ff02:: 32
Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static
L=LinkLayer(Arp)
switch:admin> portcfg iproute ge0 delete 172.16.0.0 255.255.0.0
Operation Succeeded
switch:admin> portcfg vlantag ge2 add 192.168.2.10 200 5
Operation Succeeded
switch:admin> portshow vlantag ge2
Port: ge2
Interface Address
Destination Address
-------------------------------------------------------------
192.168.2.10
0.0.0.0
192.168.0.20
192.168.0.10
192.168.0.21
192.168.0.11
2000::20
2000::10
2000::21
2000::11
switch:admin>
switch:admin> portcfg vlantag ge2 delete 192.168.2.10 200
Operation Succeeded
Gateway
*
*
*
*
2000::1:250
*
*
*
VlanId L2CoS
200
100
200
300
400
Metric Flags
0 U C
0 U H L
0 U H L
0 U H L
0 U G
0 U C
0 U C
0 U C
Flags
5 Perm Net
0 Perm
0 Perm
0 Perm
0 Perm
Fabric OS Command Reference
53-1001764-02