Brocade Communications Systems 8 Command Reference Manual page 764

2
portLoopbackTest
To run a functional test on a Brocade 8000:
Diagnostics When it detects failures, the test may report one or more of the following error messages. If errors
persist, contact Technical Support.
DATA
ERRSTAT
INIT
PORTDIED
STATS
TIMEOUT
XMIT
See Also itemList
732
switch:admin> pceeportloopbacktest
Running portloopbacktest ..............
PASSED.
Data received does not match the data sent.
Errors were found in the ASIC statistics.
Port failed to initialize.
A previously initialized port went to an uninitialized state.
Errors were found in the ASIC statistics.
Did not receive a frame in the given timeout period.
Frame transmission failure.
Fabric OS Command Reference
53-1001764-02