Brocade Communications Systems 8 Command Reference Manual page 536

2
lsDbShow
TABLE 24
Field
advertiser
incarn
length
chksum
linkCnt
flags
LinkId
out port
rem port
cost
costCnt
type
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
domain
Examples To display the link state record for a switch:
504
lsDbShow display fields (Continued)
Description
Domain ID of the switch that originated this LSR.
Incarnation number of this LSR.
Total length, in bytes, of this LSR. Includes header and link state
information for all links.
Checksum of total LSR, with exception of lsAge field.
Number of links in this LSR. Each link represents a neighbor in
NB_ST_FULL state.
Always 0.
ID of this link. It is the domain ID of the switch on the other side of the link.
Port number on the local switch.
Port number of the port on the other side of the link.
Cost of this link. The default cost for a 1 Gbps link is 1,000.
Always 0.
Always 1.
Specifies the domain ID of the LSR to be displayed. This operand is optional;
if omitted, the entire link state database is displayed.
switch:admin> lsdbshow 1
Domain = 1 (self), Link State Database Entry pointer = 0x1096da60
lsrP = 0x109784b0
earlyAccLSRs = 0
ignoredLSRs = 0
lastIgnored = Never
installTime = Aug 26 18:20:41.451
lseFlags = 0xa
uOutIfsP[0] = 0x00000000
uOutIfsP[1] = 0x00000000
uOutIfsP[2] = 0x00000000
uOutIfsP[3] = 0x00000000
uOutIfsP[4] = 0x00000000
uOutIfsP[5] = 0x00000000
uOutIfsP[6] = 0x00000000
uPathCost = 0
uOldHopCount = 0
uHopsFromRoot = 0
mOutIfsP[0] = 0x10000000
mOutIfsP[1] = 0x00000000
mOutIfsP[2] = 0x00000000
mOutIfsP[3] = 0x00000000
Fabric OS Command Reference
53-1001764-02