Brocade Communications Systems 8 Command Reference Manual page 1001

Total Bandwidth
Bandwidth Demand
Flags
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands The following operand is optional:
domain
Examples To display the topology on a single switch: domain is local, details are not displayed.
When executed from an edge fabric, topologyshow displays details for all domains, including local
domains and local translate domains:
Fabric OS Command Reference
53-1001764-02
The maximum bandwidth of the out port. A bandwidth that is less than 0.512
Gbps is adjusted to the nearest power of 2 value. A bandwidth in the range of
0.512 Gbps Included) to 1 Gbps (not included) is adjusted to the 0.512 Gbps
value. No adjustment takes place if the bandwidth is greater or equal to 1
Gbps.
The maximum bandwidth demand by the in ports.
Always D, indicating a dynamic path. A dynamic path is discovered
automatically by the FSPF path selection protocol.
Specify the destination domain for which to display the topology information.
switch:user> topologyshow
1 domains in the fabric; Local Domain ID: 97
switch:user> topologyshow
6 domains in the fabric; Local Domain ID: 7
Domain: 1
Metric: 10500
Name: fcr_xd_1_1
Path Count: 1
Hops:
Out Port:
In Ports:
Total Bandwidth:
Bandwidth Demand:
Flags:
Domain: 2
Metric: 1000
Name: fcr_fd_2
Path Count: 1
Hops:
Out Port:
In Ports:
Total Bandwidth:
Bandwidth Demand:
Flags:
2
11
0 1 2 3 4 5 6 7 8 9 15
8.000 Gbps
1275 %
D
2
15
0 1 2 3 4 5 6 7 8 9 11
2.000 Gbps
4000 %
D
2
topologyShow
969