Brocade Communications Systems 8 Command Reference Manual page 1023

port
domain
Examples To display the routing information of all the active ports:
To display the routing information of port 11 to domain 4 only:
See Also portRouteShow, topologyShow, uRouteConfig, uRouteRemove
Fabric OS Command Reference
53-1001764-02
Specify the number of the input port whose routes are to be displayed,
relative to its slot for bladed systems. Use switchShow to display a list of valid
ports. This operand is optional; if omitted, the command displays routing
information for all input ports in the switch.
Specify a remote domain in the fabric for which routing information is to be
displayed. This operand is optional; if omitted, the routing information for all
domains in the fabric is displayed.
switch:admin> urouteshow
Local Domain ID: 3
In Port Domain
---------------------------------------------------------------------------
0 1
11 2
4
16 1
27 2
switch:admin> urouteshow 1/11, 4
Local Domain ID: 3
In Port Domain
----------------------------------------------------------------------------
11 4
Out Port Metric
11 1000
0 1500
0 500
27 1000
16 1500
Out Port Metric
16 500
uRouteShow
Hops Flags Next (Dom, Port)
1 D
2 D
1 D
1 D
2 D
Hops Flags Next (Dom, Port)
1 D
2
1,0
4,0
4,0
1,1
4,16
4,16
991