Brocade Communications Systems 8 Command Reference Manual page 1046

2
zone
To validate all zones in the zone database in the effective configuration:
To prune all the zone members that are not enforceable:
2. Traffic isolation zone commands:
To create an activated traffic isolation zone with failover enabled (default).
To create a deactivated traffic isolation zone with failover disabled:.
To add an E_Port and N_Port member as a portlist to an existing TI zone:
To add the option to disable failover for a TI zone:
To add the option to enable failover for a TI zone:
To remove portlist members from an existing TI zone.
To activate the TI zone "bluezone":
To deactivate the TI zone "purplezone":
To delete the TI zone "bluezone":
1014
switch:admin> zone --validate -m 2
Effective configuration:
cfg: ticonfig
zone: regzone 1,4*
1,5*
------------------------------------
~ - Invalid configuration
* - Member does not exist
# - Invalid usage of broadcast zone
switch:admin> zone --validate -f
You are about to prune the zone configurations,
based on zone --validate output.
Do you want to prune the zone
configurations (yes, y, no, n): [no] y
switch:admin>zone --create -t ti purplezone -p "1,1; 2,4; 1,8; 2,6"
switch:admin>zone --create -t ti -o dn purplezone -p "1,1; 2,4; 1,8; 2,6"
switch:admin>zone --add purplezone -p "3,4; 3,6"
switch:admin>zone --add -o n purplezone
switch:admin>zone --add -o f greenzone" -p "3,4"
switch:admin> zone --remove bluezone -p "3,4; 3,6"
switch:admin> zone --activate bluezone
switch:admin> zone --deactivate purplezone
switch:admin> zone --delete bluezone
Fabric OS Command Reference
53-1001764-02