Brocade Communications Systems 8 Command Reference Manual page 588

2
perfAddEEMonitor
SourceID
DestID
Examples To add an end-to-end monitor to blade 1 port 2:
To add an end-to-end monitor to an Encryption switch:
In this scenario, one target disk storage device connects to the Encryption switch, and an initiator
device connects to a DCX backbone. The DCX is directly connected to the Encryption Switch. Two EE
monitors are added on port 1 of the Encryption Switch, which is an F_Port that attaches to the
target device.
1. Get the CryptoTarget container configuration. This command shows the PIDs for the target, the
556
Specifies the 3-byte SID (Source ID) of the originator device. It should be in
"0xDDAAPP" format, where DD is domain ID, AA is area ID and PP is AL_PA ID.
For example, 0x050200 has a domain ID of 5, an area ID of 2, and an AL_PA
ID of 0. SourceID and DestID both cannot be 0x000000.
Specifies the 3-byte DID (destination ID) of the destination device. It should
be in "0xDDAAPP" format, where DD is domain ID, AA is area ID and PP is
AL_PA ID. For example, 0x050200 has a domain ID of 5, an area ID of 2, and
an AL_PA ID of 0. SourceID and DestID both cannot be 0x000000.
switch:admin> perfaddeemonitor 1/2 "0x050200" "0x1182ef"
End-to-End monitor number 0 added.
virtual target, the initiator, and the virtual initiator:
EncryptionSwitch:SecurityAdmin>cryptocfg --show -container -all -stat
Encryption group name:
Number of Container(s): 1
Container name:
Type:
EE node:
EE slot:
Target:
Target PID:
VT:
VT PID:
Number of host(s):
Number of rekey session(s):
Host:
Host PID:
VI:
VI PID:
Number of LUN(s):
LUN number:
LUN type:
LUN serial number:
Encryption mode:
Encryption format:
Encrypt existing data:
Rekey:
LUN state:
Encryption algorithm:
Key ID state:
Key ID:
Key creation time:
Operation Succeeded
brcd
st_target
disk
10:00:00:05:1e:53:b8:45
0
2f:ff:00:06:2b:0e:b3:3c 2f:ff:00:06:2b:0e:b3:3c
0a0100
20:00:00:05:1e:53:b8:41 20:00:00:05:1e:53:b8:41
0a2001
1
0
10:00:00:00:c9:52:00:7d 20:00:00:00:c9:52:00:7d
01a000
20:01:00:05:1e:53:b8:41 20:02:00:05:1e:53:b8:41
0a2002
1
0x0
disk
600062B0000EB33C00000000000000000000000000000000
encrypt
native
disabled
disabled
Encryption enabled
AES256-XTS
Read write
ba:26:50:3a:22:72:01:04:c9:57:ff:27:77:e3:8d:6d
Tue May 20 08:32:25 2008
Fabric OS Command Reference
53-1001764-02