Brocade Communications Systems 8 Command Reference Manual page 787

xtun
Fabric OS Command Reference
53-1001764-02
Displays FICON and FCP emulation statistics and current runtime conditions
for a specified set of parameters. The following arguments are supported:
-fcp Displays the SCSI FastWrite/Tape Pipelining command sub-menu when
issued with a VE_Port number. The syntax for -fcp is as follows:
portshow xtun [slot/]\ve_port -fcp [level] [command] [param] [options]
The following optional operands are supported with -fcp to display FCP
emulation statistics and status information:
-help Displays the command usage. You must specify a VE_Port number to
display the help functions, for example: portshow xtun 7/12 -fcp -help.
level Specifies the level for which information is displayed. You can specify one
or more of the following levels. With each additional level, this command
generates progressively more information.
-port Displays data at the port level.
-it Displays data at the Initiator Target (SID/DID) FCP level.
-itn Displays data at the Initiator Target nexus (SID/DID) level.
-itl Displays data at the Initiator Target LUN (SID/DID/LUN) level.
-twb Displays data at the Exchange (SID/DID/LUN/Exchange) level.
command Specifies the type of information to be displayed. This operand is
optional; if omitted, the default (-stats) is used. You can specify more
than one command option. Valid commands include:
-stats Displays FCP emulation statistics. This is the default display.
-info Displays general FCP emulation information.
-cfg Displays the FCP emulation configuration.
-dump Displays a raw data dump including data for all information types.
param Limits output to one or more of the following parameters, given the
commands and levels specified with this command. This operand is
optional; if omitted, output for all parameters is displayed. There is no
default parameter.
-sid SID Displays output for the specified SID only.
-did DID Displays output for the specified DID only.
-lun LUN Displays output for the specified LUN only.
-timer Displays timer information only.
options Affects all levels and commands globally. Only one option is supported.
-zero Displays zero-valued statistics. Note that some commands may show
zero-valued information regardless of whether or not this option is
specified.
-ficon Displays sub-menu for FICON emulation display commands when issued with
a VE_Port number. The syntax for -ficon is as follows:
portshow xtun [slot/]ve_port -ficon [command] [options]
2
portShow
755