Brocade Communications Systems 8 Command Reference Manual page 584

2
pathInfo
To display basic path information in traceroute format with reverse path option:
To display path information when source port and destination port are provided along with the
traceroute option:
To display basic path information to a specific domain in a Virtual Fabric environment (the cost for
this hop is the cost of the corresponding path in the base fabric):
To display basic and extended statistics in interactive mode:
552
switch:admin> pathinfo 4 -r -t
Target port is Embedded
Hop Domain ID (Name)
----------------------------------------------------
1 11 (mps_daz_1)
2 4 (METEOR)
3 11 (mps_daz_1)
4 97 (pulsar055)
switch:admin> pathinfo 6 12 13 -t
Target port is F_Port
Hop Domain ID (Name)
-----------------------------------------------
6 (Stealth_I)
switch:admin> pathinfo 13 4
Target port is Embedded
Hop In Port Domain ID (Name)
---------------------------------------------------------
0 4 9
1 2015* 10
2 6 13
switch:admin> pathinfo
Max hops: (1..127) [25]
Fabric Id: (1..128) [-1]
Domain|Wwn|Name: [] 8
Source port: (0..15) [-1]
Destination port: (0..255) [-1]
Basic stats (yes, y, no, n): [no] y
Extended stats (yes, y, no, n): [no] y
Trace reverse path (yes, y, no, n): [no]
Source route (yes, y, no, n): [no]
Timeout: (1..30) [5]
Target port is Embedded
Hop In Port Domain ID (Name)
---------------------------------------------------------
0 E 9 (web226)
Port
B/s (1s)
Time/hop
32882 usec
32882 usec
32882 usec
32882 usec
Time/hop
108186 usec
Out Port BW
2009* -
8 1G
E -
Out Port BW
2 1G
E
Tx Rx
-----------------------------------------------
- -
Cost
1500
1000
-
Cost
1000
2
Tx
0
Fabric OS Command Reference
53-1001764-02
Rx
0