Thermal/Mechanical Reference Design; Mechanical Requirements; Processor Mechanical Parameters; Processor Mechanical Parameters Table - Intel X5365 - Xeon 3.0 GHz 8M L2 Cache 1333MHz FSB LGA771 Quad-Core Processor Design Manual

Thermal/Mechanical Reference Design

2
Thermal/Mechanical Reference
Design
This chapter describes the thermal/mechanical reference design for Quad-Core Intel®
Xeon® Processor 5300 Series. Quad-Core Intel® Xeon® Processor X5300 Series is the
performance-optimized processor with a front side bus speed of 1066 MHz or
1333 MHz. Quad-Core Intel® Xeon® Processor E5300 Series is a rack-optimized
processor with a front side bus speed of 1066 MHz or 1333 MHz. Both Quad-Core
Intel® Xeon® Processor X5300 Series and Quad-Core Intel® Xeon® Processor E5300
Series are targeted for the full range of form factors (2U, 2U+ and 1U/volumetrically
constrained). The Quad-Core Intel® Xeon® Processor L5300 Series is a
power-optimized processor with a front side bus speed of 1066 MHz or 1333 MHz. The
Quad-Core Intel® Xeon® Processor L5300 Series is targeted for volumetrically
constrained form factors (1U, server blades and embedded servers).
2.1

Mechanical Requirements

The mechanical performance of the processor cooling solution must satisfy the
requirements described in this section.
2.1.1

Processor Mechanical Parameters

Table 2-1.

Processor Mechanical Parameters Table

Parameter
Volumetric Requirements
and Keepouts
Static Compressive Load
Static Board Deflection
Dynamic Compressive Load
Transient Bend
Shear Load
Tensile Load
Torsion Load
Notes:
1. Refer to drawings in
2. In the case of a discrepancy, the most recent Quad-Core Intel® Xeon® Processor 5300 Series Datasheet
and LGA771 Socket Mechanical Design Guide supersede targets listed in
3. These socket limits are defined in the LGA771 Socket Mechanical Design Guide.
4. These package handling limits are defined in the Quad-Core Intel® Xeon® Processor 5300 Series
Datasheet.
5. Shear load that can be applied to the package IHS.
6. Tensile load that can be applied to the package IHS.
7. Torque that can be applied to the package IHS.
Quad-Core Intel® Xeon® Processor 5300 Series Thermal/Mechanical Design Guidelines (TMDG)
Minimum
Appendix B.
Maximum Unit
70 lbf
311 N
25 lbf
111 N
35 in*lbf
3.95 N*m
Table 2-1
Notes
1
3
3
3
3
2,4,5
2,4,6
2,4,7
above.
13